Skip to content
English
Customer portal Sign in
eyemagnet.com
  • There are no suggestions because the search field is empty.

Samsung SSP Display Settings

The following screen settings are also required to enable the Eyemagnet Display software to function as intended.

Network Time Protocol settings:

  1. Press Menu on the remote control
  2. Navigate to System
  3. Navigate to Time
  4. Select Network Time Protocol (NTP) and select the option Use
  5. Select Server URL and set this to time.google.com
  6. Select Timezone and select your timezone
  7. Select Save and the screen will reboot automatically

NTP settings

Auto Source Switching Settings  

  1. Return to System
  2. Navigate to Auto Source Switching
  3. Set to Preset Input
  4. Set Primary Source to HDMI 1
  5. Set Secondary Source to URL Launcher

Power Control settings:

  1. Return to System
  2. Navigate to Power Control
  3. Set Auto Power On to On
  4. Set Max Power Saving to Off
  5. Set Remote Configuration to Off
  6. Set Power Button to Power on only

SSSP6 Power Control

Eco Solution settings:

  1. Return to System
  2. Navigate to Eco Solution
  3. Set Energy Saving Mode to Off
  4. Set Screen Lamp Schedule to Off
  5. Set No Signal Power Off to Off
  6. Set Auto Power Off to Off

Input Signal Plus settings:

  1. Navigate to Picture
  2. Navigate to Advanced Settings
  3. Set Input Signal Plus to HDMI1

Once these settings have been enabled you can press Home on the remote control and navigate to the URL Launcher.

Note: This may be shown as Eyemagnet Display once the application has been launched for the first time.